User Manual

Getting Started Manual
WA-GSM-E-RevA
15
MENU FUNCTION BUTTONS
 CURSORS - Press to turn on the cursors and display the Cursor
menu. You can use the Cursor menu to set the Cursor Mode (Auto,
Off, Manual, Track). When Cursors are on (CURSORS button is lit),
turn the Adjust knob to position the cursors.
 ACQUIRE - Press to display Acquire menu. You can use the
Acquire menu to set the acquisition Sampling Mode (Sampling,
Peak Detect, Average). For more information on sampling modes,
refer to Acquisition Sampling Modes.
 SAVE/RECALL - Press to display the Save/Recall menu. You can
use the Save/Recall menu to save and recall up to 20 scope setups
or waveforms in internal memory (up to 20 waveforms) or on a USB
memory device (limited by memory capacity of USB device). You can
also use it to recall the default factory settings, to save waveform
data as a comma-delimited file (.CSV), and to save or print the
displayed waveform image.
 MEASURE - Press to display a menu of measurement parameters.
The Display Type must be set to YT mode. For more information on
measurement parameters, refer to Parameter Measurements.
 DISPLAY - Press to open the Display menu. You can use the
Display menu to set grid and waveform display styles, and
persistence.
 UTILITY - Press to open the Utility menu. You can use the Utility
menu to configure WaveAce features, such as sound, language,
counter, etc. You can also view system status and update software.