User Guide

4.
Download and install the Nexus Q app.
Adjust Nexus Q settings
To adjust a Nexus Q's settings:
1.
Open the Nexus Q app.
OR
From the Play Music app, choose Menu > Settings >
Nexus Q Settings.
2.
Touch the name of the room where the Nexus Q is located.
The Details screen for that Nexus Q appears. From here,
you can read version information and modify the brightness
or theme used to animate the LED lights or TV screen (if
one's connected) during music playback.
Touch Advanced to modify any of these settings:
● HDMI and Optical out. Lets you turn fixed volume on or
off and set the sync delay for each of these ports.
● Hardware diagnostics. Displays information of interest
to support personnel attempting to help you troubleshoot
problems with your phone.
● Forget Nexus Q. Forgetting a Nexus Q removes it from
the list of Qs that appears on your phone or tablet. This
● Factory data reset. Wipes all setup data and restarts tjhe
Nexus Q. This means you'll need to set it up all over again
from scratch.
Factory data reset without phone or tablet
You can also factory reset your Nexus Q without using your phone
or tablet:
1.
Unplug the Nexus Q, then plug it in again.
2.
Immediately place your finger over the single LED on top.
The ring LED starts flashing red. Keep your finger in place
until the ring LED starts pulsing purple (about 15 seconds).
If you lift your finger too soon, the LED turns solid red. If
this happens, unplug and plug in the Q again to start over.
After a successful reset, the circular LED displays rotating
white bars for a short time, and then starts slowly pulsing
blue, indicating it's ready to set up again.
To set up your Q after a factory reset:
1.
From your Android phone or tablet's Home screen, go to
Settings > Apps > All > Nexus Q.
22 Nexus Q