SDS
Lithium Ion Rechargable Battery Pack 
Safety Data Sheet   
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 
according to Canada Hazardous Products Regulation 
06/17/2015 
EN (English) 
SDS ID: NEST_150400 
4/1 
Personal protective equipment 
: 
Avoid all unnecessary exposure. 
Hand protection 
: 
None under normal use. If contents are released: Wear suitable gloves resistant to chemical 
penetration. 
Eye protection 
: 
None under normal use. If contents are released: Chemical goggles or safety glasses. 
Respiratory protection 
: 
None under normal use. 
SECTION 9: Physical and chemical properties 
9.1.  Information on basic physical and chemical properties 
Physical state 
: 
Solid 
Colour 
: 
white 
Odour 
: 
No data available 
Odour threshold 
: 
No data available 
pH 
: 
No data available 
Melting point 
: 
No data available 
Freezing point 
: 
No data available 
Boiling point 
: 
No data available 
Flash point 
: 
No data available 
Relative evaporation rate (butyl acetate=1) 
: 
No data available 
Flammability (solid, gas) 
: 
No data available 
Explosive limits 
: 
No data available 
Explosive properties 
: 
No data available 
Oxidising properties 
: 
No data available 
Vapour pressure 
: 
No data available 
Relative density 
: 
No data available 
Relative vapour density at 20 °C 
: 
No data available 
Solubility 
: 
No data available 
Log Pow 
: 
No data available 
Log Kow 
: 
No data available 
Auto-ignition temperature 
: 
No data available 
Decomposition temperature 
: 
No data available 
Viscosity 
: 
No data available 
Viscosity, kinematic 
: 
No data available 
Viscosity, dynamic 
: 
No data available 
9.2.  Other information 
SECTION 10: Stability and reactivity 
10.1.  Reactivity 
No dangerous reactions known. 
10.2.  Chemical stability 
The product is stable at normal handling and storage conditions. 
10.3.  Possibility of hazardous reactions 
Hazardous polymerization will not occur. If contents are released: Reacts violently with water. 
10.4.  Conditions to avoid 
Release of contents. Heat. Moisture. Avoid shock and friction. 
10.5.  Incompatible materials 
If contents are released: Strong oxidizers. Water. Organic materials. Strong reducing agents. metals. 
10.6.  Hazardous decomposition products 
If contents are released: Sulphur oxides. hydrogen chloride. Hydrogen. Corrosive vapours. Thermal decomposition generates : Hydrogen fluoride. 
Carbon oxides (CO, CO2). Aluminium. Lithium. copper. cobalt. Contact with water liberates extremely flammable gases. 










