Manual
ANYWHERE+ DEPLOYMENT GUIDE V1.0.1
ANYWHERE+ DEPLOYMENT GUIDE V1.0.1 PAGE 32
<Default>EMEA</Default>
<DisplayTowers>EMEA,US East Coast,US West Coast,Australia,Asia
Pacific</DisplayTowers>
<Towers>
<Towers>
<Tower>
<DisplayName>US West Coast</DisplayName>
<Active>true</Active>
<HostName> 72.37.244.89</HostName>
<SSLPort>443</SSLPort>
<PlainPort>8080</PlainPort>
</Tower>
<Tower>
<DisplayName>US East Coast</DisplayName>
<Active>true</Active>
<HostName> 72.37.244.89</HostName>
<SSLPort>443</SSLPort>
<PlainPort>8080</PlainPort>
</Tower>
<Tower>
<DisplayName>EMEA</DisplayName>
<Active>true</Active>
<HostName> 80.254.146.211</HostName>
<SSLPort>443</SSLPort>
<PlainPort>8080</PlainPort>
</Tower>
<Tower>
<DisplayName>Asia Pacific</DisplayName>
<Active>true</Active>
<HostName> 80.254.146.211</HostName>
<SSLPort>443</SSLPort>
<PlainPort>8080</PlainPort>
</Tower>
<Tower>
<DisplayName>Australia</DisplayName>
<Active>true</Active>
<HostName> 72.37.244.89</HostName>
<SSLPort>443</SSLPort>
<PlainPort>8080</PlainPort>
</Tower>
</Towers></ConfigurationParameters>
</AnywherePlus>
The first edit is the Host Exceptions. In here you will need to put your corporate subnets
and any public web servers you want to access directly.
The default setting is the following:
<!-- Host Exceptions ';' separated -->
<host_exceptions>10.*;127.*;169.254.*;172.*;192.*;224.*;240.*;liveupdate.syma
ntecliveupdate.com</host_exceptions>
For example you may want to add in the following:
Internal Domains not already included in the default are:
193.*
Direct access websites not included are:
windowsupdate.microsoft.com