Manual

ANYWHERE+ DEPLOYMENT GUIDE V1.0.1
ANYWHERE+ DEPLOYMENT GUIDE V1.0.1 PAGE 29
The default anytime policy should be used.
You now need to select a restriction. You should pick a restriction that already has some
category blocks in it. If you don’t have a restriction other than the default, please see
Appendix A.
The Policy should look like the following:
Click on the ‘Save’ button. The following screen will appear:
You policy is now active.
CREATING THE USER AUTHENTICATION KEY
Click on the
tab of the Portal.
Go to Authentication>User Keys
The following screen will appear: