Nest x Yale Lock Installation and Programming Guide Warning Starus lndica1Dr 1 • 2 __ Str1ke Plate 3 JJ ,DOWNLOAD Battery Cover THEBILTAPP =g:;- ............ &11:1 ...... AAAikallne Back butkln Battelies Inside Lock Inside Mounting Plate Battery Cover Key FAILURE TO FOU..OW lHESE INSTRUCTIONS COULD RESULT IN DMWlE TO lHE PRODUCT AND \IOID lHE FACTORY WAAAANTY PIN AYRD-540-INST-FUL Rev 4 ~ ~e BILT. ...,..
For 1-3/4" [44.5mm] Thick Door !( 2 2-314• [70mm] Backset I ) It ....... ' \ --- \ \ Dla Thru Hole -------t--- ----~ 1 2-118" [54mm] Dia I / ' Thru Hole For 1-3/8" [35mm] Thick Door I ~ I' \ ' .,.; / 2-3/8" [60mm] Backset 50mm PIN AYRIJ.640.1NST·FUL Rev 4 2-1/8" ~.
Provided Fasteners Tools Needed ' © Standard Phillips Head Screwdriver ©© Tools necessary only for new doors or adjusting existing prep. ® n Drill Pencil I Measure x2(1Dx2(1Dx2 Wood Mortise Chisel 0" Level AnASSAABl.OYGra14J brwld • ,.
Before you begin, open door and remove your existing deadboll. AnASSAABl.
Before you begin, double check your door prep measurements• .,'2 318" or2 314" (~mm or 7~mm} • Backset ~ - - ./2-1 /8" (54mm}"""""". Diameter t co 0 5-112" (140mm} SlandardjCheck clearanCB with lower hardware if this dimension is less than 5-1/2" (140mm}. D 0 EXISTING AnASSAABl.OYGra14J brwld EXISTING - - - PIN AYRD-540-INST-FUL Rev 4 ., ..
Before you begin, prepare door &frame. Necessary only for new doors or adjusting existing prep. Inside of Door or 2-3/4" (70mm} Backset Drill holes 112 way through door then complate from other slda to prevent splitting. AnASSAABl.
CD l 7 Installing Deadbolt x2 2-318" (60mm) Position BoH must be in retracted (unlocked) position. Mechanism will be horizontal. Note UP arrow on deadbolt. 14l 2-318" (60mm) Backaet (Horizontal Orientation) ,,,, \ OR \ ' ', ' =~ \ •2-318" (60mm) or 2-314" (70mm) AnASSAABl.
® 8 Installing Strike Plate r ~ ' x2 .. .... ~ ~ ~-...... .... Choose standard strike plate screws or security screws. ~~ ~ \.. x2 AnASSAABl.
Installing Keypad Installing Interior Mounting Plate Bolt must be in retracted (unlocked} position. Nota horizontal orientation of . mechanism. ~ I ~ ~ ~ Make sure plata and keypad are ~ ~ ~ ~ ~ level before tightening through lnsida of Door AnASSAABl.OYGra14J brwld Outside of Door Choose through bolt appropriate for your door thickness. See Page3. PIN AYRD-540-INST-FUL Rev 4 boHs.
® 10 Removing Batt__e_rv_c_o_v_er_ _ _ _ _ _ __ AnASSAABl.
® 11 Attaching the Cable ~,_,-.._ secure cable in hooks. AnASSAABl.
(J) 12 Installing Inside Lock I x2 Make sure bolt Is retracted. Make sure inside lock is properly seated onto bottom of mounting plate and excess cable is tucked into lock cavity. AnASSAABl.
® 13 Testing Operation Close door and check bolt operation. ~/ (+) AnASSAABl.OYGra14J brwld Bolt should rotate freely and easily. Go back to step 3 to recheck installation if there is resistance.
® 14 Installing BaHeries/Handing the Lock ------"Hi from Yale and Nest. • Door must be closed prior to inserting batteries. Lock automatically calibrates itself for use after battery installation. AnASSAABl.
~ Installing Cover 0 Congratulations, you've installed the Nest x Yale Lock! AnASSAABl.
Programming Instructions 16 Touch Yale logo to wake lock. You will be guided to set up the Master Passcode by following the audio instructions on the lock. Once installation is complete, download the Nest App to add the lock to your Nest account. Additional passcodes and further programming can be done in the Nest app. Note that the Master Passcode may also need to be set within the app. For written programming/troubleshooting instructions and instructions in other languages, visit www.ShopYaleHome.
Nest Labs, Inc. Limited Warranty Nest Connect THIS LIMITED WARRANTY CONTAINS IMPORTANT INFORMATION ABOUT YOUR RIGHTS AND OBLIGATIONS, AS WELL AS LIMITATIONS AND EXCLUSIONS THAT MAY APPLY TO YOU. 1. WHAT THIS LIMITED WARRANTY COVERS; PERIOD OF COVERAGE Nest Labs, Inc .
7. LIMITATION OF LIABILITY THE NEST LABS ONLINE SERVICES ("SERVICES") PROVIDE YOU INFORMATION ("PRODUCT INFORMATION") REGARDING YOUR NEST PRODUCTS OR OTHER PERIPHERALS CONNECTED TO YOUR PRODUCTS ("PRODUCT PERIPHERALS"). THE TYPE OF PRODUCT PERIPHERALS THAT MAY BE CONNECTED TO YOUR PRODUCT MAY CHANGE FROM TIME TO TIME. WITHOUT LIMITING THE GENERALITY OF THE DISCLAIMERS ABOVE, ALL PRODUCT INFORMATION IS PROVIDED FOR YOUR CONVENIENCE,"AS IS", AND "AS AVAILABLE".
