User's Guide

1
1
2
2
14
10. Connect power
Plug the 230 V connector into the back
of your Nest Protect.
11. Install your Nest Protect
Tuck any excess wiring into the dry lining box
first. Line up the three tabs on the back of your
Nest Protect with the notches on the back
plate. Hold Nest Protect against the back plate
and turn it clockwise. Continue turning until it’s
square with the wall or ceiling. Install the rest of
your Nest Protects if you have more.
Tip: If you ever need to remove it (for cleaning or battery
replacement), turn off power to your Nest Protect
at the fuse box or remove the fuse first. Then turn it
anticlockwise until it disconnects from the back plate.