Technical Specifications
••StringA-Level
™
System
For shower wall tile installations
in any standard or custom configuration
Roughly align StringA-Level
Secure StringA-Level sections to wall
Set tile on top of StringA-Level
Designed primarily for shower wall tile installations, the StringALevel™
Tile Support System is for use on any wall mounted tile installation where
tiling begins above the oor. The system is a set of reusable tools that
eliminate time wasting straightness and level problems with wood string-
ers. The system is comprised of interlocking sections with level vials that
are used in series to form a continuous angle support shelf on which the
rst course of tile rests. The sections are temporarily attached to the wall
with user supplied screws and washers through multiple slots in each sec-
tion. Available in kit and component form with illustrated usage instruc-
tions.
This 13” long section has four living hinges that conform to curves, inside
and outside corners. A level vial set in each end makes it easy to main-
tain level around corners. This section can be attached to another Flexible
Section, or a Rigid Section, and has ve slots for attaching to the wall.
Molded of yellow plastic and is 13 15/16” long x 1 1/4” wide x 2” high.
This 27” long section is for straight walls and has a single level vial in the
center. It can be attached to another Rigid Section, or a Flexible Section,
and has four slots for attaching to the wall. Molded of red plastic and is 26
7/8” long x 1 1/4” wide x 2” high.
• StringA-Level Kits
No. SLSK-0204 StringA-Level Standard Kit
For use over standard bathtubs or in showers. Consists of
two Flexible Sections for the corners, and four Rigid Sec-
tions, using one or two on the side wall and one each on the
front and back walls. Supplied with carrying case.
No. SLCK-1010 StringA-Level Contractor Kit
For use in custom showers, or jobs with multiple tiled ar-
eas. Consists of 10 each of both the Flexible Section and
Rigid Section. Supplied with carrying case.
•StringA-Level Sections
No. SL-1300-FS StringA-Level Flexible Section This
is the 13” long yellow plastic section for curves and cor-
ners.
No. SL-2700-RS StringA-Level Rigid Section
This is the 27” long red plastic section for straight walls.
•StringA-Level Replacement Vials
No. SL-78-RV 7/8” Vial — For use with the:
No. SL-1300-FS Flexible Section. Sold ve vials per pack-
age.
No. SL-138-RV 1 3/8” Vial — For use with the:
No. SL-2700-RS Rigid Section. Sold ve vials per
package.
Flexible Section
Rigid Section
Flexible Section
Flexible Section
Rigid Section
Rigid Section
Part #: SLSK-0204
Part #: SLCK-1010
Mark E. Industries
1-866-771-9470 www.markeindustries.com