Technical Specifications

Shower Seat and StringA-Level Tile Support System

100-A

No. GPSS-3024 Goof Proof ® Shower Seat

For new or retrofit installations

This Shower Seat is a heavy duty stay-in-place molded plastic

form that is easily installed, and can be tiled the same day. The

Shower Seat is a standard 30" wide, and has guide marks on the

top surface to make it easy to trim the seat to 24" wide. The front

face has a 3/16" wide tile support ledge for easier tile alignment and

full tile support. Two level vials are supplied to indicate the proper

minimum water drainage slope of ¼" per 12" run. For new instal-

lations, the seat is installed over the wall boards and secured into

blocking between the studs using six 2¼" long screws. For retrofit

installations, the seat is installed over the tile and secured with the

screws into six plastic toggle anchors. Capacity is 400 lbs. Screws,

anchors and shims (to adjust for out of square walls, if necessary)

and illustrated installation instructions are included. Weighs 7½ lbs.

3/16"

3⅛"

15⅝"

Side View

U.S. Patent Pending

Top View

24⅝"

21⅞"

30⅝"

Level Vial

Screw Holes

Level Vial

Screws, Anchors

and Shims

(6 each)