Product Brochure

A-6
Side View
Top View
6"
1⁄"
3" Snap-In Ring2" Snap-In Ring
Attaches to Standard Float Sticks
U.S. Patent No. 5,022,430
No. QPUCR-108 Quick Pitch® Universal Center Ring
This Universal Center Ring is designed to accommodate
either 2" or 3" shower drains, square drain risers and most
other specialty shower drains. It comes with a 2" and 3"
snap-in insert to match the threaded riser portion of the
drain. The Universal Center Ring has 24 Standard Float Sticks
attachment slots placed every 15°, a 6" inside diameter and is
1⁄" high. It is recommended that Extra Standard Float Sticks
(No. XFS-101.2) be used because the center ring which is
supplied in the Quick Pitch® Standard Kit is not needed.
No. PWP-106 Positive Weep Hole Protector™
No. QC-109 Quick Clips
The Quick Clips are designed to be used with the Schluter
Kerdi Drain, Noble TS and Quick Drain Systems. These clips
hold the Quick Pitch® Standard and Extended Float sticks in
place for the installation on a wood or concrete sub-oor.
Package contains 12 clips, 24 screws and 12 double-sided
tape pieces.
Note: The Extra Float Stick Kit XFS-101.2 is also recommended
for these applications.
This patented clear plastic ring is designed to keep mortar
from the weep holes in a drain. The ridges of the Positive
Weep Hole Protector™ allow for water to ow underneath the
mortar and into the weep holes. The inner and outer diameter
of the disk are perforated to allow for customizing depending
on shower drain size.