Specifications

The power consumption
Power off： < 200uA
working： < 2W
Operating temperature/humidity 5～35℃ / 10～90%RH
Storage temperature/humidity -20～45℃ / 10～90%RH
3．Introduction to working mode
1. Switching order of working mode:
A. Mode key switching order:
I. Connect to mobile phone APP: visual care mode --→ bactericidal and anti-
inflammatory mode --→ visual care mode;Ii. Mobile phone disconnected: non-visual
nursing mode --→ bactericidal and anti-inflammatory mode --→ non-visual nursing mode;
B. In case of mobile phone connection: 1) Enter visual nursing mode by default;2)
Manually switch to the sterilizing and anti-inflammatory mode;
3) Vibration reminder for 5 minutes;
2. Visual care mode: enter the mode when connected to the mobile phone, turn on the
vacuum pump, camera and white light-filling LED, and send the video to the mobile APP
to check the blackhead suction process. You can take photos or record videos in this
state;
3. Non-visual nursing mode: in the state of not answering the phone, it will enter by
default. The vacuum pump blackhead suction nursing mode will be turned on, and the
camera will not work (the light-filling LED will not be turned on by default);
4. Sterilization and anti-inflammatory mode: the working time of this mode is not
limited. The motor stops working and blue light is turned on by default for
sterilization and anti-inflammatory;
5. Overtime reminder in nursing mode: in the nursing mode, after the motor has worked
for 5 minutes, a prompt box will pop up on the mobile APP to prompt consumers to pay
attention to the care time so as to avoid skin damage. The vacuum pump motor stops for
500 milliseconds and works for 500 milliseconds and circulates for 3 times to remind
consumers when it does not take over;
4．1 Definition of suction tap of nozzle
Mode work gear PWM duty cycle Suction range（KPA）
Slight suction
1 50% ≥ -45
Standard suction
2 60% ≥ -50
Powerful suction
3 75% ≥ -58