Propane Conversion Kit Instructions

23. Reset all other appliances so they function normally.

24. Turn off the gas and electrical supply to the appliance,

remove the pressure taps at the gas valve, reinstall the

plugs using pipe joint compound or tape.

25. Replace the regulator cover screw on the regulator sleeve.

26. Attach the kit provided ATTENTION label to the gas valve

where it can be readily seen.

27. Turn on the gas and electrical supply, energize the appli-

ance and recheck for leaks.

28. Observe at least 3 ignition cycles to assure quick and

smooth ignition and burner operation.

29. Reinstall the access panels.

NOx SCREEN REMOVAL

NOTE: To prevent premature heat exchanger failure, follow the

instructions in the NON-CONDENSING FURNACES AND

PACAKGE GAS-ELECTRIC section to remove all metal

screen inserts from the entrance of heat exchanger tubes

during propane conversions. Not all models will have metal

screen inserts.

NON-CONDENSING FURNACES

AND PACKAGE GAS-ELECTRIC

1. Remove the screws securing the burner box to the parti-

tion panel. Separate burner box from unit.

2. Remove the screw(s) securing the NOx screen retention

plate and remove the plate.

3. Remove and discard NOx screens.

4. Reinstall the NOx screen retention plate and burner box.

PARTITION PANEL

RETENTION PLATE

BURNER BOX ASSY.

SCREENS

Typical NOx Screen Removal