HTP Installation Instructions

REMOVE

GAS FURNACE

FIELD FABRICATED SUPPORT

FOR UNCASED COIL

BOTTOM FLANGE DETAILS (TYP.)

OIL-FIRED FURNACE

6”

FIELD FABRICATED SUPPORT

FOR HI-TEMP DRAIN PAN KIT

(CASED OR UNCASED)

COIL

SUPPORT

INSTALLATION INSTRUCTIONS

To remove drain pan from coil pan assembly:

1. Remove 4 screws holding coil assembly to drain pan.

2. Discard the 4 screws.

3. Remove the drain pan.

To install the high temperature drain pan:

4. Place the coil assembly on to the new high temperature

drain pan.

NOTE: When installing a high temperature drain pan kit

for oil-fired furnace applications be sure to fabricate a 6

inch spacer as indicated below.

5. Install the 4 screws supplied with the kit (#8 X 3/8).

X = Coil Pan Width + Insulation Thickness x 2