HTP Installation Instructions

Attention Installing Personnel
As a professional installer you have an obligation to know the
product better than the customer. This includes all safety
precautions and related items.
Prior to actual installation, thoroughly familiarize yourself with
this Instruction Manual. Pay special attention to all safety
warnings. Often during installation or repair it is possible to
place yourself in a position which is more hazardous than
when the unit is in operation.
Remember, it is your responsibility to install the product safely
and to know it well enough to be able to instruct a customer in
its safe use.
Safety is a matter of common sense...a matter of thinking
before acting. Most dealers have a list of specific good safety
practices...follow them.
The precautions listed in this Installation Manual are intended
as supplemental to existing practices. However, if there is a
direct conflict between existing practices and the content of
this manual, the precautions listed here take precedence.
HTP-A, HTP-B, HTP-C, HTP-D
HIGH TEMPERATURE DRAIN PANS
INSTALLATION INSTRUCTIONS
IO-255C
12/2013
Inspection
Before installing the HTP-* drain pan, verify that the part num-
ber is correct for the unit model.
PARTS TYPE
PACKING LIST
G.M.C. PART NO.
QTY.
HTP-A = 14" coil BT5076504 1
HTP-B = 17 1/2" coil BT5076505 1
HTP-C = 21" coil BT5076506 1
HTP-D = 24 1/2" coil BT5076507 1
HARDWARE KIT - BT1393212 1
INSTRUCTIONS - IO-255* 1
PARTS LIST
DRAIN PAN
NOTE: SPECIFICATIONS AND PERFORMANCE DATA LISTED HEREIN ARE SUBJECT TO CHANGE WITHOUT NOTICE
Quality Makes the Difference!
All of our systems are designed and manufactured with the same high quality standards regardless of size or
efficiency. We have designed these units to significantly reduce the most frequent causes of product failure.
They are simple to service and forgiving to operate. We use quality materials and components. Finally, every
unit is run tested before it leaves the factory. That’s why we know. . .There’s No Better Quality.
Visit our website at www.daikincomfort.com, www.goodmanmfg.com or www.amana-hac.com for information on:
© 2004-2006, 2013 Goodman Manufacturing Company, L.P.
is a registered trademark of Maytag Corporation or its related companies
and is used under license. All rights reserved.
• Parts
• Contractor Programs and Training
• Financing Options
• Products
• Warranties
• Customer Services