Kit Installation Manual

3
Figure 2
6. For all electric heat kits with circuit breakers, mount
the circuit breaker mounting bracket as shown in Figure
3, using the supplied screws. Insert the four (4) screws
as shown in Figure 3 (two through the control panel
flange and two into the cabinet corner post).
For 25kW applications, see Figure 4 for installation.
Figure 3
Install
Screws -
Six (6)
25kW
Figure 4
7. For all single phase electric heat kits with circuit
breakers, break out the appropriate area of the plastic
circuit breaker cover on the upper access panel of the
air handler. The circuit breaker cover may be rotated if
necessary. See Figure 5.
See Figure 6 for all three phase installations.
Figure 5
Figure 6