GSZC16 Specs

Product Specifications
2 www.goodmanmfg.com SS-DSZC16
SS-DSZC16 www.goodmanmfg.com 3
DSZC16
0241A
DSZC16
0361A
DSZC16
0481A
DSZC16
0601B

Nominal Cooling (BTU/h) 24,000 36,000 48,000 60,000
Nominal Heang (BTU/h) 24,000 36,000 48,000 60,000
Decibels 72 73 74 75

RLA 11.7 15.3 21.2 28.8
LRA 58.3 83.0 104.0 152.9

Horsepower 1/6 1/6 1/6 1/6
FLA 1.2 1.2 1.2 1.2

Refrigerant Line Size¹
Liquid Line Size (“O.D.) ⅜" ⅜" ⅜" ⅜"
Sucon Line Size (“O.D.) ¾" ⅞" 1⅛" 1⅛"
Refrigerant Connecon Size
Liquid Valve Size (“O.D.) ⅜" ⅜" ⅜" ⅜"
Sucon Valve Size (“O.D.) ¾" ⅞" ⅞" ⅞"
Valve Connecon Type Sweat Sweat Sweat Sweat
Refrigerant Charge (oz.) 153 203 263 273
Shipped with Orice Size NA NA NA NA

Volts -Hz 208/230-60 208/230-60 208/230-60 208/230-60
Minimum Circuit Ampacity ² 15.8 20.3 27.7 37.2
Max. Overcurrent Protecon ³ 25 35 45 60
Min / Max Volts 197/253 197/253 197/253 197/253
Power Supply Conduit Size ½" or ¾" ½" or ¾" ½" or ¾" ½" or ¾"

Equipment Weight
190 233 305 309
Ship Weight (lbs)
208 255 327 331

^ Proper sizing and installaon of equipment is crical to achieve opmal performance. Split system air condioners and heat
pumps must be matched with appropriate coil components to meet ENERGY STAR® criteria. Ask your contractor for details or visit
www.energystar.gov. The www.energystar.gov website provides up-to-date system combinaons cered to meet ENERGY STAR
requirements. See Page 22 for all ENERGY STAR-cered combinaons as of this document’s revision date.
¹ Tested and rated in accordance with AHRI Standard 210/240
² Wire size should be determined in accordance with Naonal Electrical Codes; extensive wire runs will require larger wire sizes
³ Must use me-delay fuses or HACR-type circuit breakers of the same size as noted.

• Always check the rang plate for electrical data on the unit being installed.
• Installer will need to supply ⅞” to 1⅛” adapters for sucon line connecons.
• Unit is charged with refrigerant for 15’ of ⅜” liquid line. System charge must be adjusted per Installaon Instrucons Final Charge
Procedure.
• Installaon of these units requires the specied TXV Kit to be installed on the indoor coil.
THE SPECIFIED TXV IS DETERMINED BY THE OUTDOOR UNIT, NOT THE INDOOR COIL.