Specifications

24 www.goodmanmfg.com SS-DSXC18
SS-DSXC18 www.goodmanmfg.com PB
Goodman Manufacturing Company, L.P., reserves the right to disconnue, or change at any me, specicaons or designs without
noce or without incurring obligaons. © 2016 Goodman Manufacturing Company, L.P. • Houston, Texas • Printed in the USA.
Accessories
 
DSXC18
036**
DSXC18
048**
DSXC18
060**
ABK-20 Anchor Bracket Kit
◊
X X X
ASC-01 An-Short Cycle Kit X X X
B1141643¹ 24V Transformer X X X
CSR-U-1 Hard-start Kit X X
CSR-U-2 Hard-start Kit
CSR-U-3 Hard-start Kit X
FSK01A
2
Freeze Protecon Kit X X X
LSK02A Liquid Line Solenoid Valve X X X
OT18-60A
3
Outdoor Thermostat/Lockout Thermostat X X X
TX3N4
4
TXV Kit X
TX5N4 TXV Kit X X
◊
Contains 20 brackets; four brackets needed to anchor unit to pad
¹ This component is included in the CTK01AA communicang thermostat kit.
² Installed on indoor coil
³ Available in 24V legacy mode only. This feature is integrated in the communicang mode.
⁴ Condensing units and heat pumps with reciprocang compressors require the use of start-assist components when
used in conjuncon with an indoor coil using a non-bleed thermal expansion valve refrigerant metering device or
liquid line solenoid kit. The TXV should always be sized based on the tonnage of the outdoor unit.
8
7
56
4
12
3
8
67
45
12
3
E
D
B
A
C
E
D
B
A
C
CONFIDENTIAL PROPERTY OF THE GOODMAN MANUFACTURING COMPANY, L.P. NOT TO BE DISCLOSED TO OTHERS, COPIED, OR USED FOR ANY PURPOSE
EXCEPT AS AUTHORIZED IN WRITING. MUST BE RETURNED UPON DEMAND, ON COMPLETION OF ORDER, OR OTHER PURPOSE FOR WHICH IT WAS LENT.
COMPONENTS AND MATERIALS SPECIFIED HEREIN WILL ALSO CONFORM TO THE APPLICABLE SECTION OF GOODMAN MSP 824.01 WORKMANSHIP
STANDARD FOR FIT, FEEL AND FINISH.
SPECIAL CHARACTERISTICS:
=
6SIGMA
= CRITICAL CHARACTERISTIC
=
SIGNIFICANT CHARACTERISTIC
SC
CC
6s
ENG:
DWN BY:
DO NOT SCALE DRAWING
A
REV
SHT 1 OF 1
TOLERANCES:
ANGLES ± 1.5°
.X : ± .1
.XX : ± .03
.XXX : ± .015
HOLE Ø : ± .005
TUBE CUT LG: ± .063
DRAWING TO BE INTERPRETED IN
ACCORDANCE WITH ASME Y14.100
DIMENSIONS ARE IN INCHES
UNLESS OTHERWISE NOTED
ECN
REV
DESCRIPTION CHK
D DATE
XXXXXXX
A
-
GL
ZONE
XXXXX


  
DSXC180361A*
35½ 35½ 38¼
DSXC180481A* 35½ 35½ 38¼
DSXC180601A* 35½ 35½ 38¼
Goodman Manufacturing Co., LP
DSXC18
Dimensions