Specifications

28 www.goodmanmfg.com SS-GSXC18
SS-GSXC18 www.goodmanmfg.com PB
Goodman Manufacturing Company, L.P., reserves the right to disconnue, or change at any me, specicaons or designs without
noce or without incurring obligaons. © 2017 Goodman Manufacturing Company, L.P. • Houston, Texas • Printed in the USA.
Accessories
 
GSXC18
024**
GSXC18
036**
GSXC18
048**
GSXC18
060**
ABK-20 Anchor Bracket Kit X X X X
ASC-01 An-Short Cycle Kit X X X X
B1141643 24V Transformer X X X X
CSR-U-1 Hard-start Kit X X X
CSR-U-2 Hard-start Kit
CSR-U-3 Freeze Protecon Kit X
FSK01A Liquid Line Solenoid Valve X X X X
LSK02A Outdoor Thermostat/Lockout Thermostat X X X X
OT18-60A TXV kit X X X X
TX2N4 TXV kit X
TX3N4 TXV kit X
TX5N4 TXV kit X X
◊
Contains 20 brackets; four brackets needed to anchor unit to pad
¹ This component is included in the CTK01AA communicang thermostat kit.
² Installed on indoor coil
³ Available in 24V legacy mode only. This feature is integrated in the communicang mode.
⁴ Condensing units and heat pumps with reciprocang compressors require the use of start-assist components when
used in conjuncon with an indoor coil using a non-bleed thermal expansion valve refrigerant metering device or
liquid line solenoid kit. The TXV should always be sized based on the tonnage of the outdoor unit.
8
7
56
4
12
3
8
67
45
12
3
E
D
B
A
C
E
D
B
A
C
CONFIDENTIAL PROPERTY OF THE GOODMAN MANUFACTURING COMPANY, L.P. NOT TO BE DISCLOSED TO OTHERS, COPIED, OR USED FOR ANY PURPOSE
EXCEPT AS AUTHORIZED IN WRITING. MUST BE RETURNED UPON DEMAND, ON COMPLETION OF ORDER, OR OTHER PURPOSE FOR WHICH IT WAS LENT.
COMPONENTS AND MATERIALS SPECIFIED HEREIN WILL ALSO CONFORM TO THE APPLICABLE SECTION OF GOODMAN MSP 824.01 WORKMANSHIP
STANDARD FOR FIT, FEEL AND FINISH.
SPECIAL CHARACTERISTICS:
=
6SIGMA
= CRITICAL CHARACTERISTIC
=
SIGNIFICANT CHARACTERISTIC
SC
CC
6s
ENG:
DWN BY:
DO NOT SCALE DRAWING
A
REV
SHT 1 OF 1
TOLERANCES:
ANGLES ± 1.5°
.X : ± .1
.XX : ± .03
.XXX : ± .015
HOLE Ø : ± .005
TUBE CUT LG: ± .063
DRAWING TO BE INTERPRETED IN
ACCORDANCE WITH ASME Y14.100
DIMENSIONS ARE IN INCHES
UNLESS OTHERWISE NOTED
ECN
REV
DESCRIPTION CHK
D DATE
XXXXXXX
A
-
GL
ZONE
XXXXX


  
GSXC180241B* 35¾ 35¾ 40
GSXC180361B* 35¾ 35¾ 40
GSXC180481B* 35¾ 35¾ 42¼
GSXC180601B*
35¾ 35¾
42¼
Goodman Manufacturing Co., LP
DSXC18
Dimensions