Specifications

SS-DSXC16 www.goodmanmfg.com 7/17
Supersedes 6/17
Contents
Nomenclature ......................................2
Product Specicaons..........................3
Expanded Cooling Data ........................4
AHRI Rangs .......................................20
Dimensions .........................................29
Wiring Diagram ..................................30
Accessories .........................................31
DSXC16
Cooling Capacity : 24,000 - 60,000 BTU/h
High-Efficiency
Split System Air Conditioner
Up to 16 SEER
Standard Features
• Two-Stage Copeland® UltraTech™ scroll compressor
• High-density foam compressor sound blanket
• ComfortNet™ Communicaons System compable
• Expanded ComfortAlert™ diagnoscs
• Set-up capable with two low-
voltage wires to outdoor unit
• Diagnosc indicator lights and
storage of six fault codes
• Color-coded terminal strip for
non-communicang set-up
• High- and low-pressure switches
• Factory-installed lter drier
• Coil and ambient temperature sensors
• Two-speed, quiet condenser fan motor
• AHRI Cered; ETL Listed
Cabinet Features
• Heavy-gauge galvanized-steel
cabinet with sound control top
• Baked-on powder-paint nish
with 500-hour salt-spray approval
• Wire fan discharge grille
• Steel louver coil guard
• Top and side maintenance access
• Single-panel access to controls with space
provided for eld-installed accessories
• When properly anchored, meets 2010
Florida Building Code unit integrity
requirements for hurricane-type winds
(Anchor bracket kits available.)
* Complete warranty details available from your local dealer or at www.goodmanmfg.com. To receive the Lifeme Compressor Limited Warranty
(good for as long as you own your home), 10-Year Unit Replacement Limited Warranty and 10-Year Parts Limited Warranty, online registraon must
be completed within 60 days of installaon. Online registraon is not required in California or Québec.
Proper sizing and installaon of equipment is
crical to achieving opmal performance. Split
system air condioners and heat pumps must
be matched with appropriate coil components to
meet ENERGY STAR® criteria. Ask your contractor
for details or visit www.energystar.gov.