Condensing Unit & Heat Pump R410A Service Manual
60
ACCESSORIES
ASZ13
Model Description
ASZ13
018
ASZ13
024
ASZ13
030
ASZ13
036
ASZ13
042
ASZ13
048
ASZ13
060
AFE18-60A All-Fuel Kit X X X X X X X
ASC 0 1 Anti-Short Cycle Kit X X X X X X X
CSR-U-1
4
Hard-start Kit X X X X
CSR-U-2
4
Hard-start Kit X X
CSR-U-3
4
Hard-start Kit X X
FSK01A
2
Freeze Protection Kit X X X X X X X
LSK02* Liquid Line Solenoid Kit X X X X X X X
OT/EHR18-60 Emergency Heat Relay kit X X X X X X X
OT18-60A
3
Outdoor Thermostat w/Lockout Stat X X X X X X X
TX2N4A
4
TXV Ki t X X
TX3 N 4
4
TXV Ki t X X
TX5 N 4
4
TXV Ki t X X X
1) Contains 20 brackets; four brackets needed to anchor unit to pad
2) Installed on indoor coil.
3) Required for heat pump applications where ambient temperatures fall below 0°F with 50% or higher relative humidity.
4) Condensing units & heat pumps with reciprocating compressors require the use of start-assist components when used in conjuntion with an indoor
coil using a non-bleed expansion valve refrigerant metering device.
5) Field-installed, non-bleed, expansion valve kit - Condensing units and heat pumps with reciprocating compressors require the use of start-assist
components when used in conjuntion with an indoor coil using a non-bleed thermal expansion valve refrigerant.