Condensing Unit & Heat Pump R410A Service Manual

61
ACCESSORIES
GSZ13
Model Description
G/VSZ13
018
G/VSZ13
024
G/VSZ13
030
G/VSZ13
036
G/VSZ13
042
G/VSZ13
048
G/VSZ13
060
AFE18-60A
All-Fuel Kit
X X X X X X X
ASC 0 1
Anti-Short Cycle Kit
X X X X X X X
CSB-15
Sound Blanket
X X X
CSB-16
Sound Blanket
X X X X
CSR-U-1
4
Hard-start Kit X X X X
CSR-U-2
4
Hard-start Kit X X
CSR-U-3
4
Hard-start Kit X X
FSK01A
2
Freeze Protection Kit X X X X X X X
LSK02*
Liquid Line Solenoid Kit X X X X X X X
OT/EHR18-60 Emergency Heat Relay kit X X X X X X X
OT18-60A
3
Outdoor Thermostat w/Lockout Stat X X X X X X X
TX2N4A
5
TXV Ki t X X
TX3 N 4
5
TXV Ki t X X
TX5 N 4
5
TXV Ki t
X X X
GSZ13 Three-Phase
Model Description
GSZ1 3
036*
GSZ1 3
048*
GSZ1 3
048*
GSZ1 3
060*
GSZ1 3
060*
AFE18-60A All-Fuel Kit X X X X X
ASC 0 1 Anti-Short Cycle Kit X X X X X
FSK01A
2
Freeze Protection Kit X X X X X
LSK02* Liquid Line Solenoid Kit X X X X X
OT/EHR18-60 Emergency Heat Relay kit X X X X X
OT18-60A
3
Outdoor Thermostat w/Lockout Stat X X X X X
TX3 N 4
5
TXV Ki t X X
TX5 N 4
5
TXV Ki t X X X
CSB-15 Sound Blanket Kit X X X X
CSB-16 Sound Blanket Kit X
LAKT01 Low Ambient Kit X X X X X
1) Contains 20 brackets; four brackets needed to anchor unit to pad
2) Installed on indoor coil.
3) Required for heat pump applications where ambient temperatures fall below 0°F with 50% or higher relative humidity.
4) Condensing units & heat pumps with reciprocating compressors require the use of start-assist components when used in conjuntion with an indoor
coil using a non-bleed expansion valve refrigerant metering device.
5) Field-installed, non-bleed, expansion valve kit - Condensing units and heat pumps with reciprocating compressors require the use of start-assist
components when used in conjuntion with an indoor coil using a non-bleed thermal expansion valve refrigerant.