CSCF Evaporator Installation Instructions

ManualsBrandsGoodman ManualsEvaporator Coils2.5 to 3 Ton Horizontal Slab Evaporator Coil

NOTE: SPECIFICATIONS AND PERFORMANCE DATA LISTED HEREIN ARE SUBJECT TO CHANGE WITHOUT NOTICE

Visit our websites at daikincomfort.com, www.goodmanmfg.com or amana-hac.com for information on:

• Products

• Warranties

• Customer Services

• Parts

• Contractor Programs and Training

• Financing Options

5151 San Felipe, Suite 500, Houston, TX 77056

9. AFTER THE TAILPIECE HAS COOLED, confirm posi-

tion of the white Teflon® seal and hand tighten the 13/16"

flare nut.

10. Torque the 13/16" flare nut to 7-25 ft-lbs. or tighten 1/6 of

a turn. Do not overtighten.

Excessive torque can cause orifices to stick. Use the proper

torque settings when tightening orifices.

CAUTION

11. Replace suction line insulation.

12. Check fittings for leaks after complete installation. Evacu-

ate and charge on the low side.

NOTE: With the piston in the distributor, the seal end should

point inside the distributor body and should not be seen when

looking into the end of distributor. Make sure the piston is free

to rotate, and move up and down in the distributor body.

Aluminum Indoor Coil Cleaning

(Qualified Servicer Only)

This unit is equipped with an aluminum tube evaporator coil.

The safest way to clean the evaporator coil is to simply flush

the coil with water. This cleaning practice remains as the

recommended cleaning method for both copper tube and alu-

minum tube residential cooling coils.

An alternate cleaning method is to use one of the products

listed in the technical publication TP-109 (shipped in the lit-

erature bag with the unit) to clean the coils. The cleaners

listed are the only agents deemed safe and approved for use to

clean round tube aluminum coils. TP-109 is available on the

web site in Partner Link > Service Toolkit.

NOTE: Ensure coils are rinsed well after use of any chemical

cleaners.

CUSTOMER FEEDBACK

We are very interested in all product comments.

Please fill out the feedback form on one of the following links:

Daikin Products: (https://daikincomfort.com/contact-us)

Goodman® Brand Products: (http://www.goodmanmfg.com/about/contact-us).

Amana® Brand Products: (http://www.amana-hac.com/about-us/contact-us).

You can also scan the QR code on the right for the product brand you purchased

to be directed to the feedback page.

PRODUCT REGISTRATION

Thank you for your recent purchase. Though not required to get the protection of

the standard warranty, registering your product is a relatively short process, and

entitles you to additional warranty protection, except that failure by California

and Quebec residents to register their product does not diminish their warranty

rights.

For Product Registration, please register as follows:

Daikin Products: (https://daikincomfort.com/owner-support/product-registration).

Goodman® Brand products: (https://www.goodmanmfg.com/product-registration).

Amana® Brand products: (http://www.amana-hac.com/product-registration).

You can also scan the QR code on the right for the product brand you purchased

to be directed to the Product Registration page.

DAIKIN

GOODMAN® BRAND

AMANA® BRAND

GOODMAN® BRAND

DAIKIN