ASPT Service Manual
Table Of Contents
- IMPORTANT INFORMATION
- PRODUCT IDENTIFICATION
- Checking Voltage
- Checking Wiring
- Checking Thermostat And Wiring
- Thermostat Wiring
- Checking Transformer And Control Circuit
- Checking Contactor And/Or Relays
- Checking Contactor Contacts
- Checking Fan Relay Contacts
- Checking Loss Of Charge Protector (Heat Pump Models)
- Checking High Pressure Control
- Checking Low Pressure Control
- Copeland Comfort Alert™ Diagnostics - 3-Wire module
- Copeland Coresense™ Diagnostics - 3-Wire module
- Checking Capacitor
- Resistance Check Using A Digital Multi-Meter
- Capacitance Check Using A Digital Multi-Meter (In Capacitance Mode)
- Testing a Run Capacitor Under Load
- Checking Outdoor Fan and Blower Motors (PSC Motors)
- Checking Fan and Blower Motor (ECM Motors)
- Checking ECM Motor Windings
- ECM CFM Adjustments MBE/AEPF
- Blower Performance Data
- Checking High Efficiency Motors
- EEM Blower Replacement
- MBR/AR*F Electronic Blower Time Delay Relay
- Checking Compressor
- Resistance Test
- Ground Test
- Unloader Test Procedure
- Operation Test
- Checking 3-Phase Scroll Compressor Rotation
- Testing Crankcase Heater (Optional Item)
- Checking Reversing Valve and Solenoid
- Testing Defrost Control
- Testing Defrost Thermostat
- Checking Heater Limit Control(s)
- Checking Heater Elements
- Electric Heater (Optional Item)
- Checking Heater Limit Control(s)
- Checking Heater Elements
- Refrigeration Repair Practice
- Leak Testing (Nitrogen or Nitrogen-Traced)
- Evacuation
- Charging
- Checking Compressor Efficiency
- Overfeeding
- Underfeeding
- Checking Superheat
- Subcooling on Expansion Valve System
- Checking Expansion Valve Operation
- Checking Restricted Liquid Line
- Overcharge Of Refrigerant
- Non-Condensables
- Compressor Burnout
- Refrigerant Piping
- Duct Static Pressures
- Single Piece Air Handler External Static
- Two Piece Air Handler External Static Pressure
- Furnace External Static Pressure
- Periodic Maintenance
PRODUCT IDENTIFICATION
36
Model/Rev Description
ASX130**1AA
Initial release new models of Amana
®
Brand Deluxe 13 SEER AC R410A conditioners.
ASX130611AA
Initial release of new models of Amana® Brand Deluxe 13 SEER AC R410A conditioners;
replaced ASX130601* models.
ASX130611AA
Introduction of Amana
®
brand 13 SEER R-410A Condensers that supplement our current
5 ton models.
ASX130**1BA
Initial release of models using SmartCoil
®
coils. Smaller units with new louvers. Piston
size changed; other components unchanged.
ASX130**1CB
Relocation of low pressure switch from liquid line to suction line. Compressor safeguard to
prevent low pressure from entering.
ASX130181DA Initial release of models with new 266 fan motor; Low pressure switch removed.
ASX130181DB
ASX130[24-48]1CD
ASX130601CC
Low pressure switch 013M00082 added; updated wiring diagram.
ASX130[24-48]1CC
ASX130601CB
Initial release of models with single speed PSC motors; Does not contain a low pressure
switch, low ambient temperature switch and relay.
ASX130361DA
Release of 3 ton models with a 26" chassis.
ASX130361DE Refrigerant Charge Reduction
ASX130[42,48]1CF
ASX130601CE
ASX130611AC
Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
ASX130[24,30,60]1CF
ASX130361DF
ASX130[42,48]1CG
Factory Refrigerant Charge Optimization
ASX130181DD
ASX130[24,30]1CG
Replaced motor 0131M000266 with 0131M00811
ASX130361DG Replaced motor 0131M00018P with 0131M00813
ASX130421CH
Change from copper wound compressor motor to aluminum wound compressor motor.
ZP34K5EPFV130 and ZP36K5EPFV130.
ASX13
AMANA® BRAND SPLIT X-CONDENSERS 13 SEER