Users Manual

Positive Pet Vibration Training Collar Instruction Manual
Getting Started
Included In Your Package
Positive Pet Trainer
Nylon Collar Strap
Micro USB Charging Cable
Remote Control
3. Place it on Your Pet
The Positive Pet comes with a nylon collar strap that can
be trimmed down to t your pet, or you may use your own
standard-size collar.
To insert the collar strap, push the sliding door on the side of
the device in the direction of the arrow. Insert the strap and
slide the door back into place.
To turn ON the Positive Pet Collar, hold the power button for 1–2 seconds or
until the blue LED ashes and you feel the vibration motor activate.
To turn OFF the Positive Pet Collar, hold the power button for 1–2 seconds
or until the blue LED ashes. The blue indicator light will ash for about 5
seconds.
Insert the nylon collar strap Activation
Interchangeable Magnetic Vibration Plates
2. Power On & O
1. Charge it Up
Before getting started, charge your Positive Pet Collar for at
least 5 hours until the blue charging indicator light turns o.
The blue LED will light up and remain on while charging. To
access the charging port, push the sliding door in the direction
of the arrow.
3 Magnetic Plates
Charging Port
LED Indicator Light
SMOOTH PLATE
for short-haired pets
ROUND BUMPS
for medium-haired pets
POINTY BUMPS
for long-haired pets
NOTE: The Positive Pet Trainer should be positioned on the collar
so that the bumps on the magnetic vibration plates sit against
your pet’s neck. When placed on your pet properly, the LED
indicator on the Positive Pet Trainer should face out.
Activate the device using the remote. When the device is
activated the blue LED indicator light will ash. A single press
of the remote will activate the Positive Pet vibration motor. The
device will activate continuously with constant pressure on the
remote button. The remote will activate the Positive Pet up to
55 feet (16m) away.