User's Manual

ManualsBrandsGoodbetterbest ManualsElectronicsGIOTECK PS3 HF-2 CONTROLLER

Table Of Contents

HF-2 BLUETOOTH CONTROLLER FOR PS3™

ERGONOMIC FPS CONTROLLER

MODEL G30000A

This product is not designed, manufactured, sponsored or endorsed by Sony Computer Entertainment Inc. or any of its divisions.

PS3™ is a trademark of Sony Computer Entertainment Inc. Specification & appearance are subject to change without prior notice.

Summary of content (6 pages)

PAGE 1
MODEL G30000A This product is not designed, manufactured, sponsored or endorsed by Sony Computer Entertainment Inc. or any of its divisions. PS3™ is a trademark of Sony Computer Entertainment Inc. Specification & appearance are subject to change without prior notice. Copyright © 2011 GBB Group. All Rights Reserved.
PAGE 2
thank you features & details Thank you for purchasing the HF-2 Bluetooth Controller from Gioteck. We hope that this product will go beyond your expectations for a quality made accessory. Please read this booklet thoroughly before using the product and review the PS3™ manual for additional details regarding PS3™ operation. Thank you & enjoy! The HF-2 has been ergonomically designed to enhance the "First Person Shooter" gameplay experience. You’ll find it’s the little touches that make all the difference.
PAGE 3
set up battery replacement The HF-2 Controller is very easy to set up, and for your convenience it can be used as either a wired or wireless device. To use your controller as a wired device connect the USB to the PS3™ [01] and the mini USB to the controller’s charging socket [02]. To use your controller wirelessly, remove the battery compartment cover and insert two AA batteries or a Gioteck Rechargeable battery pack. The HF-2 does not need to contain batteries to function as a wired device.
PAGE 4
pairing your controller operation The HF-2 must be paired to your PS3™ to use it wirelessly. To enable pairing, connect your controller to the PS3™ via a USB cable and pairing will happen automatically. The pairing process can take up to 10 seconds. To power on your controller, press and hold the home button for 2 seconds until a red LED appears in the crescent. To power off your controller, press and hold the home button for 1 second.
PAGE 5
operation thumbstick calibration For your convenience a flip switch has been built into the body of the HF-2 controller enabling you to swap the functions assigned to the L1 & L2 and R1 & R2 buttons. The HF-2 has calibrated thumbsticks that will sharpen aim and improve accuracy during serious FPS gameplay. If would like to change the HF-2 thumbstick sensitivity, download the latest Gioteck software from the HF-2 support pages on our website: www.gioteck.
PAGE 6
troubleshooting legals Having trouble with your HF-2 controller? These troubleshooting steps will show you the smoothest path to resolving your issue. Be sure to perform troubleshooting before having your product serviced. This product complies with the following legal regulations. For further information go to www.gioteck.com. The HF-2 will not turn on. • Check to make sure that the batteries or battery pack is fully charged. • Make sure that the batteries are properly installed.