EX-03 BLUETOOTH® HEADSET FOR PS3™ EXCLUSIVELY DESIGNED FOR GAMING ON PS3™
thank you Thank you for purchasing the EX-03 Bluetooth® Headset for PS3™ from Gioteck. We hope that this product will go beyond your expectations for a quality made accessory. Please read this booklet thoroughly before using the product and review the PS3™ manual for additional details regarding PS3™ operation. Thank you & enjoy! precautions This product has been designed with the highest concern for safety. However, any electrical device, if used improperly, has the potential to cause harm.
features & details When it comes to online game & chat, the EX-03 is a natural gaming partner. Comfortable, lightweight & ergonomic, the EX-03 features the latest Next Gen Chipset with built-in noise cancelling technology and superior enhanced voice clarity.
pairing your headset 1. Within the Settings' menu, press X on Accessory Settings. 2. Press X on the icon labelled: Manage Bluetooth® Device. 3. Press X on Yes to register your Bluetooth® Device. 3 seconds 4. At the next screen, prepare your 5. Press X to Start Scanning. headset (from off) to be paired Once the scan is complete, by holding down the power button the PS3™ will recognise all continuously until the LEDs flash Bluetooth® wireless technology alternate Blue & Red.
7. Press X, enter 0000 (four zeros) as the Pass Key & press X on OK. 8. You will be taken to a new screen stating: Register completed. 9. Press O twice on your controller to go back to Accessory Settings. 10. Scroll down and press X on Audio Device Settings. 11. Choose PS3 EX-03 as your input and output device from the lists. Press X to confirm your choices. 12. Scroll down and press X on OK. Your EX-03 Bluetooth® Headset is now ready to use..
set up The EX-03 Bluetooth® headset is designed for maximum flexibility and comfort. You can mold the earhook to size and choose from 3 different earbuds for the perfect fit. Simply follow the instructions below for details. ear bud fitting Take the size of ear bud that you want to use and place the ear bud on the back edge of the stalk (01). Apply pressure then roll the ear bud onto the stalk of the earpiece (02).
headset positioning For a comfortable fit, hold the EX-03 body (01) and flex the earhook upwards (02) looping it around your ear (03). Once the earhook is in position, carefully place the speaker into your ear (04) and make any final adjustments so that the headset is firmly in position. Finally, maneuver the microphone arm into place where you feel it offers maximum voice clarity.
charging your headset The headset contains a rechargeable Lithium-ion battery. Prior to using the headset for the first time, it is strongly recommended to fully charge the battery for 3 hours. Connect the USB cable to your PS3™ (01) and insert the DC connector (02) into the headset (03). The LED will illuminate red during the charging process and will be blue when fully charged. NOTE: Charging indication will be delayed for a few minutes if the headset has not been used for a long time.
operating your headset 1. To power on your headset, press and hold the power button until the LED flashes Blue. NOTE: If the LED flashes Red only, the battery will need to be charged. A low battery is also denoted by a low tone repeated every 20 seconds. 2. To power off your headset, press and hold the power button until the LED flashes Red. adjusting volume muting Tap the + button to increase the volume in increments until the headset reaches your desired volume level.
troubleshooting Having trouble with your EX-03 Next Gen Bluetooth® Headset? These troubleshooting steps will show you the smoothest path to resolving your issue. Be sure to perform troubleshooting before returning your headset. The PS3™ is unable find the headset. • Make sure that your headset is in pairing mode (see page 4). • If the headset has been paired with another Bluetooth® device before, the PS3™ will have trouble finding the headset.
legals This product complies with the following legal regulations. For further information go to www.gioteck.com This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including inter ference that may cause undesired operation. The device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: The manufacturer is not responsible for any changes or modifications not expressly approved by the manufacturer for compliance, such modifications could void the user’s authority to operate the equipment.
