EX1 - RT BLUETOOTH HEADSET INSTRUCTION MANUAL
FITTING YOUR HEADSET
CONNECTING TO YOUR PHONE 1 TURN ON BLUETOOTH 2 3s ‘HOLD’ POWER BUTTON 3 4 5 SEARCH SELECT FOR NEW DEVICES EX1-RT ENTER PASSKEY 0000 (FOUR ZEROS)
EX1-RT Power / Answer / Reconnect Volume Increase Volume Decrease / Mute
FUNCTIONALITY POWER ON : Hold for 2 secs until all LED’s turn Red. [Voice Prompt: Power On] VOLUME INCREASE Tap to increase the volume in increments. POWER OFF : Hold for 3 secs until LED turns Red, then off. [Voice Prompt: Power Off] TAKE A CALL : Press once. REJECT A CALL : Hold 2 secs. END A CALL : Press once. REDIAL : Press twice. (Re-dialing is only available for the first device if two are connected.
DISTANCE LESS THAN 10M / 33FT The EX1-RT headset has a range up to 10 metres (33 ft) from a device before audio degrades or loses connection. The Bluetooth word mark and logos are owned by the Bluetooth sig, inc. and any use of such marks by Gioteck is under licence.
CHARGING 2h The Power LED will be red during charging and all LED’s will light when charged. Charging indication will be delayed if the headset has not been used for a long time.
To use the headset for the first time you must pair it with a Bluetooth® enabled device. 1. Ensure the headset is within 1 meter of the device. 2. Activate Bluetooth on the device (Settings >Bluetooth > ON) 3. With the EX1-RT Off, hold the Power button for 3 secs until all the LED’s illuminate to a solid state. [Voice Prompt: Pairing ] 4. Select ‘EX1-RT’ from the list of Bluetooth devices, or select ‘Scan for new devices’. 5. If the device asks for a passcode, enter four zeros (0000). 6.
FOR YOUR SAFETY To help ensure risk-free operation please read these Operational and Safety Guidelines before use: • Contains small parts. Not suitable for children under 3 years of age. • Store in a dry and dust free area. • Do not store in areas of extreme low (0°C) or high (40°C) temperatures. • Avoid direct sunlight and heat sources. • Do not allow the product to get wet or dirty; doing so may cause damage. • Do not clean with benzene, paint thinner, acetone, alcohol, or other such solvents.
LEGAL This product complies with the following legal regulations. For further information go to www.gioteck.com This device complies with Industry Canada RSS 210 standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
Technical Assistance: gioteck.
