User's Manual Part 1

RED

WHITE

HDMI CABLE

(NOT SUPPLIED)

TV/MONITOR

HDMI INPUT

TV / MONITOR

AUDIO OUT

USB PORTHDMI OUTPUT

PLEASE NOTE: Your TV/Monitor will need to have Audio Out (RED/WHITE) sockets.

Most, but not all TVs/Monitors have RED/WHITE Audio IN and YELLOW Video IN sockets

but not all TV’s, and even fewer monitors have RED/WHITE Audio OUT sockets.

XBOX SET UP : WITH HDMI (OPTION B)

1] Connect the HDMI (not included) between your Xbox and TV/Monitor.

2] Connect the RED/WHITE connectors from the RCA to Audio cable

into the Audio OUT RED/WHITE sockets on your TV/Monitor.

3] Connect the the wireless transmitter into an available

USB port on the front of your Xbox console.

4] Connect the audio cable into the wireless transmitter.

5] Turn on your Xbox and make sure that your controller is wirelessly

connected to your console (do not leave the controller charging

or it will transfer electrical noise into your headset).

6] Turn your Headset ON by pressing the Power Button. Pairing with the

wireless transmitter should happen automatically. However, if pairing is

unsuccessful, please refer to the Pairing section in ‘Getting Started’.

7] Make sure that microphone mute is OFF.

8] Go to chat set up.

EX6UNI-wireless-manual-book.indb 10 11/09/2013 10:24