User's Manual

How to Use Your Wireless Audio Adapter
Caution: DO NOT powered on the wireless audio box alone with battery insert and power
adapter connected at the same time to avoid uncessery dangerous.
No external driver installed under OS support of Win 2000, XP and Mac. Please follow the
steps as below and complete the association process between Wireless Audio Dongle and
Wireless Audio Box.
1. Plug the Wireless Audio Dongle into the USB port of PC or Mac, and you may find the
LED start blinking for powered on indicator.
2. Powered on the Wireless Audio Box with battery insert or power adapter connected
first, and then press the Wireless Audio Box PWR button over 3 seconds until the
Wireless Audio Box LED start blinking for powered on indicator.
3. Press the Wireless Audio Dongle pairing bottom over 3 seconds first and then press
the Wireless Audio Box Volume bottom over 3 seconds until you heard the beep
sound form Wireless Audio Box to indictor the association successfully.
4. Now the association has been successfully, and you may start to use your audio
adapter wirelessly.
Note
：
The Wireless Audio Box will be automatically entry the power saving mode when no audio
single receive after five minutes about, please re-push the PWR button for power on and
keep use the Wireless Audio Adapter.
4