User's Manual

18
1. Before associating the Z-Wave
®
Window/Door Detector,
please disconnect Detector and Contact Magnet.
Contact
magnet
Detector
or
Wired
contact
Contact
magnet
Detector
2. Associate the Z-Wave
®
Window/Door Detector with a
controller.
3. Associate the appliances under Z-Wave
®
Window/Door
Detector using Z-Wave
®
controller or utility software. The
supported appliances is up to 5.
4. Once the setup is completed, the Window/Door Detector
can be used as a bridge to transmit the commands from
controller to the associated Z-Wave
®
appliances.
Note: The Z-Wave
®
Window/Door Detector does not support
to associate other Z-Wave
®
Window/Door Detectors.