User's Manual

11
Command classes
Command class is a programming protocol which allows
the Z-Wave
®
Window/Door Detector to communicate with
other compatible
Z-Wave
®
devices. 2 association groups are
supported by the Z-Wave
®
Window/Door Detector.
The Z-Wave
®
Window/Door Detector supports 2 association
groups. Group1 supports the report of Alarm and warning
message when the battery is low. Only one device can be
associated in group1. Group2 supports to associate with
5 devices which means all the devices associated with the
Z-Wave
®
Widow/Door Detector will receive the relevant
reports once the Z-Wave
®
Window/Door is triggered and
con gured.
To program the Z-Wave
®
Window/Door Detector, choose
one of the command classes below, and then adjust the
parameters. For more detailed con gurations, refer to the
controller's instruction manual.
COMMAND_CLASS_BASIC
COMMAND_CLASS_SENSOR_BINARY
COMMAND_CLASS_WAKE_UP
COMMAND_CLASS_ASSOCIATION
COMMAND_CLASS_CONFIGURATION
COMMAND_CLASS_BATTERY
COMMAND_CLASS_MANUFACTURER_SPECIFIC
COMMAND_CLASS_VERSION