User's Manual

9
To mount your Z-Wave device
The Z-Wave Window/Door Detector can be mounted on any location that
can be open or closed, such as closets, doors, windows, safes. The Z-Wave
Window/Door Detector can be mounted in two ways: Double Sided Tapor
Screws. These instructions will go over the screw mounting method.
1. Unscrew the Battery Lid from the Door/ Window Sensor and slide the lid off.
2. Use the screws that provided in the mounting kit to screw the lid onto your
desired location.
3. Slide the Z-Wave Window/Door Detector back on the lid and fasten the lid
back on the device.
4. Please make sure your window or door is closed. Use the remaining screws
to mount the contact magnet adjacent to the Z-Wave Window/Door Detector.
For best performance, please also make sure that there is as little space
between Z-Wave Window/Door Detector and the contact magnet as
possible.
Z-Wave Window/Door Detector enables you to make sure the safety of
anywhere you desire to control in door. When the window or door is open, the
LED will light red because of the detector can’t detect the contact magnet.