Operation Manual

18
User‘s Manual
For correct installing, electrotechnical basic knowledge accor-
ding to VDE 0620-1 is necessary. In doubt, let installation work
do a trained electrician.
1. Checkthepackingcontentforbeingcomplete.
2. Compareallproductstobecompatibletoeachother.
3. Switchoffthemainsfuse.
4. Checkwithavoltagetestertobesure,alllinesarereally
 stress-free.Ifindoubt,aelectricianmustdotheinstallation
 work.
Choose the installation place away from street lighting, plants or
air conditioning vents. Avoid direct sun insulation eg. neer
windows.
5. Attachthemotionsensortoawallorceilinginaheight,menti-
 onedinthespecications-withtheinstallationmaterial.
 >> Atthis,attendtothecablelocationanditsalign
 ment.
 >>Alsoattendtothedetectionareaandmax.distance.
6. Installthemotionsensorlikeshown:
ATTENTION! Risk of short-circuit!
Never bridge contacts!
Donotputthingsintoventilationslotsorports!