User manual

User‘s Manual
22
4.3 Adjusting the pole assembly
Allen key 5mm F
1. Loosen the Allen screw a few by
turning it counterclockwise.
2. Adjust the preferred height.
In this case act by the size of your at
screen.
Fig. 14: Adjusting the pole assembly
3. Fix the Allen screw with the VESA
Plate holder by turning it clockwise.
F
Fig. 15: Fixing the VESA Plate
4.4 Flat screen mounting
Risk of injury by tripping and falling
>> Place, transport and install product, parts
and acceories in a safe way.
Risk of material damage by improper
procedure
>> Only use moderate force when tightening
the screws in order to avoid damaging
threads.
>>
>>
NEVER set the screen on the front during
installation!
Donotdamagetheatscreenbytoo
long screws.
Tab. 18: Mounting the at screen
Allen key 3mm D