User manual

10
User‘s Manual
5 Graphic Diagram:
AC mains connection
Housing
Selection key for
output voltage
DC connection
6 Operating:
6.1 Using the Power Supply for Notebooks:
You can operate and charge a Notebook and its battery by using this function.
1. Select the required output voltage of the device, needed by your Notebook. You nd it on
your device, in its User‘s Manual or on the original power supply. The arrowhead shows
the selected output voltage. (Fig. 1)
possible adjustments:
12V DC - max. 6,5A
14/15/16/18V DC - max. 6A
18.5/19V DC - max. 5,75A
19,5/20V DC - max. 5,5A
21/22V DC - max. 5A
USB 5V DC - max. 0,5A
2. Connect the tting DC adaptor plug to the DC socket of the device. Mind the right
polarity and size of the DC plug. You will nd detailed Information in the User‘s Manual of
your device on the original power supply.
positive polarity:
A wrong polarity can damage your device or there is no function at all.
This polarity is the most
common one.
NOTE:
Fig. 1