User manual

10
Manual
5 Graphic Diagram:
AC mains connection
Housing
DC connection
Adaptors for output voltage
DC adaptor plugs
6 Operating:
You can operate and charge a Notebook and its battery by using this device.
1. Select the output voltage of the power supply by selecting the output adaptor, required
for your Notebook. Find it on your device, in its manual or on the original power supply.
Please read the Specications to check the adjustments.
2. Connect the tting DC adaptor plug to the DC socket of the power supply. Mind the right
size of the DC plug. Find detailed Information in the manual of your device on the original
power supply.
positive polarity:
A wrong polarity can damage your device or there is no function at all.
3. Make sure of not overloading the product by a too high power consumption of your
device. Find the specic maximum output power in the Specications.
4. Connect the power supply with its AC mains cable.
5. Connect your notebook to your NTS power supply after selecting and plugging to the
right DC adaptor plug and output voltage adaptor.
This polarity is the most
common one.
NOTE: