User manual

EN
- 2 -
User Manual
Wireless charging pads
Goobay
®
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
REV2015-07-24
V1.1
We reserve the right of misprints and changes to
product, packaging or product documentation.
44168/44169
1 Safety Instructions
The user manual is part of the product and contains important informati-
on for correct use.
Read the user manual completely and carefully before use.
The user manual must be available for uncertainties and passing the
product.
Keep this user manual.
• Comparethespecicationsofalluseddevicestoensure
compatibility.
Not meant for children.
Do not open the housing.
In case of questions, defects, mechanical damage, trouble
and other problems, non-recoverable by the documentation,
contact your dealer or producer.
Do not modify or alter products, product parts and accesso-
ries constructively.
Avoid stresses such as heat and cold, moisture and direct
sunlight, vibration and mechanical pressure.
Only use in dry ambience.
Magnetism
The product contains magnetic materials.
Regarding the compatibility with implanted medical devices,
consult a doctor before use.
Keep a minimum distance of 20 cm to medical equipment.
Do not store or operate near bank cards.
Risk of stumbling
Place, install and transport product, product parts and acces
sories in a safe way.
2 Description and Function
2.1 Wireless charging pad
This product is a wireless charging pad for charging mobile devices such as mobile
phones or camaras via wireless induction. The wireless charging pad can be char-
ged via the USB charging cable to PC, USB charging adapter or USB car charger.
2.2 Scope of delivery
Wireless charging pad 44168 or 44169, 2 USB charging cable, User manual
2.3 Operating elements
1
4
2
3
3
44168
44169
1 Induction coils
2 LED for standby and charging state
3 Shelf for mobile devices
4 Micro-USB input
2.4 Specications
Wireless charging pad 44168 44169
Connections
Micro-USB input (IN),
wireless charging interface
Input 5 V
, 1 A
Output 5 V
, 1 A (ind.)
Frequency band 110-205 kHz
wireless charging distance max. 4-10 mm
minimum distance to medical devices 20 cm
Dimensions 112 x 75 x 12 mm Ø69 x 9 mm
Weight 100 g 50 g
USB charging cable
Connectors
Micro-USB plug,
USB-A plug
Cable length 0.30 / 1.50 m
3 Intended Use
We do not permit using the device in other ways like described in chapter
Description and Function“. Not attending to these regulations and safety
instructions might cause fatal accidents, injuries, and damages to
persons and property.
4 Preparing
>> Comparethespecicationsofalluseddevicestoensure
compatibility.
>> Check the scope of delivery for completeness and integrity.
5 Connecting, placing and charging
1. Place the wireless charging pad onto a plane, horizontal surface.
2. Plug the USB charging cable into the input (IN) of the
wireless charging pad and into the USB charging socket of
- a USB charging adaptor,
- a PC or
- an USB car charger.
The LED shines green and shows the standby mode, when voltage is supplied.
3. Place a Qi standard-able device onto the wireless charging pad.
44168 44169
44168 and 44169:
The LED
- shines blue, when the device is recognized and charges.
- ashes, when the charging position of the device is improper.
44169: Additionally to the above mentioned display
- a short beep tone occurs, when the device is recognized and charges.
- a continuous tone sounds, when the charging position of the device is
improper.
>> Move the device a little back and forth until the LED shines blue.
4. Check the charging state of your device by its status display.
5. Remove all cable connections after use.
6 Maintenance and Cleaning
The product is maintenance-free.
Clean only with a dry, soft cloth.
Do not use cleaning agents and chemicals.
Store cool and dry.
Store the product out the reach of children and in a dry and dust-protec-
ted ambience when not in use.
Keep and use the original packaging for transport.
7 Disposal Notes
We reserve the right to printing errors and changes to product, packaging
or product documentation.
See our terms of warranty. These are available in their current form under
the given contact details.
8 Disposal Notes
According to the European WEEE directive, electrical and electronic
equipment must not be disposed with consumers waste. Its components
must be recycled or disposed apart from each other. Otherwise contami
native and hazardous substances can pollute our environment.
As a consumer, you are committed by law to dispose electrical and electronic de-
vices to the producer, the dealer, or public collecting points at the end of the devices
lifetime for free. Particulars are regulated in national right. The symbol on the pro-
duct, in the user`s manual, or at the packaging alludes to these terms. With this kind
of waste separation, application, and waste disposal of used devices you achieve an
important share to environmental protection.
WEEE No: 82898622