Manual

TS200 / TS250

Translation of the original operating instruction and spare parts list

- 20-

5007090-00

BA-E

• Mount back the outer flange.

• Tighten the left threaded hexagonal nut on the motor shaft.

• Put back the mobile part of the blade guard in place. Tighten the 3 screws (front-up-back).

4.6 Electrical connections

Before connecting the machine to a power supply, make sure:

• The voltage/phase supply corresponds to the information indicated on the motor plate and

machine plate.

• Available power supply must have ground connection in conformity with safety regulations.

• The size of the electric cable of the extended lead is sufficient (H07RNF 3x2.5mm

up to 50m for

230V)