Operation Manual

151
OPTIONAL CONNECTIONS
onnecting the Platea Plus / Tekna Plus
C
monitor to a video recorder or TV.
ctivation of a second camera.
A
A
_
+
D
Malla
V
in
V
out
CN4
SAR-12/24
IN IN
NC NA C
Platea Plus /
Tekna Plus
2C
2 Camera
nd
The use of a SAR-12/24 relay will be required to activate a second camera and an internal
modificationonthemonitorshallbedone,asit'sdescribedonpage124.Thisfacilitydisablesthe
intercomfunction.Ifbothfunctionsarerequired,useA1terminaltoactivatethesecondcamera.
To activate this function, press monitor push button at any moment with no dependence of the
handsetposition.
Ifthisdeviceissharedforallmonitors,linktheir2Cterminal and use just one relay unit. In case that
each monitor has its own camera use a SAR-12/24 relay unit for each monitor and don't link the
2Cmonitorterminals.
Thispushbuttoncanbeusedtoactivateotherauxiliarydevices,astheA1terminalisused.
Usualapplicationsarethesurveillanceoftheelevatorentrance,receptionhall,...
A
_
+
D
Malla
V
in
V
out
CN4
Platea Plus /
Tekna Plus
If your TV or video recorder have a SCART connector, it will
be possible to view the picture from the door panel on
theTVscreen.
Remove the end of line jumper, that's placed on the CN4
connector. Connect the coaxial cable between terminals
17(shield)and20(hot)oftheSCARTconnector.