Operation Manual

127

MONITOR INSTALLATION

ix the monitor connector to the wall.

ix the monitor.

Avoid to place the monitor near to heating sources, in dusty

locationsorsmokyenvironments.

To install the monitor directly over the wall, drill two holes of

Ø6mm.andusethesuppliedscrews.

The upper part of the monitor connector must be placed

at 1,60m. height roughly. The minimum distance

between the monitor connector and the closest object

mustbe5cm.

Place the monitor at right angles to the

connectorandaligntheattachingholes ofthe

monitor with the attachment hooks of the

connector,asitisshownonthedrawing.

Lock out the monitor. Press the right side till the

attachmentcliplocksthemonitorfirmly.

To disassemble the monitor from the connector,

use a plain screwdriver to release the

attachment clip. Removethe monitor from the

connector,withspecialattentiondonotfalls.