Operation Manual

124
MONITOR DESCRIPTION
unction push buttons.
F
escription of the identification label.
D
PLATEA-PLUS
REF
11758802
CODE
10060045
VERSION
5.00
Nº SERIE
100615137263
MASTERSLAVE
INTER A1
CODIGO / CODE
PUERTAESCALERA PISO
Floor DoorStair
ATENCIÓN
Alta tensión. No abrir la tapa.
Manipular sólo por personal
del servicio técnico.
WARNING
High voltage. Don't open cover.
Handle only by technical service.
On-Off push button. After any monitor reset and during the next 45 seconds, all the
monitorfunctionswillbedisabled,withtheexceptionofcallreception.
If the handset is on the craddle allows the activation of an optional second camera (*). If
not,allowstomakeanintercomcallortoactivatethesecondcamera(*).
Ifthehandsetisonthecraddleallowstheactivationofanoptionaldevice.Ifnot,allowsto
calltoaslaveporter'sexchange(*)ortoactivatetheoptionaldevice.
If the handset is on the craddle allows to see the picture from the master door panel. If
not, allows to establish audio and video communication with the door panel that has
been configurated with the autoswitch-on function. This function is disabled if a
communicationisalreadyestablished.
If the handset is on the craddle sends a panic call to the porter's exchanges that have
enabled the reception of this type of call. If not, allows to call to the master porter's
exchange. During call reception and communication progresses allows the lock
releaseactivation.
(*) Second camera activation and call to a slave porter's exchange functions require an internal
modification of the monitor. If any of these functions are required, contact with your nearest
authorizeddistributor.
Second camera activation disables the intercomm function and call function to a slave porter's
exchangedisablesoptionaldevicefunction.
For an easiest repair, replacement or increasement of
the existing monitors, fill the indentifying label
information.
MASTER:mastermonitor.
SLAVE:slavemonitor.
INTER:slavemonitorwithintercomfunction.
A1:monitorconnectedtoanauxiliarydevice.
CODE:pushbuttoncode(seepage114).
STAIR:backbonecode(building)(seepage116).