Operation Manual

119
GENERAL DOOR PANEL INSTALLATION
DOOR PANEL INSTALLATION
Thisprogrammingmodeallowstoassigntoamonitor/telephoneapushbuttonofthegeneraldoor
panelthatitwishestocall.
Before the push button of the general door panel must be programmed with backbone and
monitor/telephonecode,(seepage118).
Programming the monitor/telephone:
Locate the SW2 configuration dip switch of the general door
panel to program, placed at the upper left side (back) of the
soundmodule.Withtheswitch1 to OFFand3to ON,setthe
switch 2 to ON: to show that the system is ready for
programming,thegeneraldoorpanelwillreproduceatone.
Then program the monitor/telephone, as it is described in the page 128 (monitor), 131 and 135
(telephone), (see manual T1ML if the monitor/telephone is Platea Uno, T-740 Uno or T-940
Uno).
Bearinmindtheconfigurationdipswitch(asitisdescribedinthepreviousstep).
rogramming the monitors and telephones from a general door panel.
P
escription of the function connector CN5.
D
ThefunctionconnectorCn5islocatedattheupperleftsideofthebackof
thesoundmodule.
Plug the cable that is supplied with the module, to realize the following
functions:
10
1
9
2
8
3
7
4
6
5
Top view CN5
Description connector CN5
ð"AP" function: It activates the relay of the lock release "CV1" and "Cv2", configurable activation
timeof3or15secondsviadipswitchSW1-2(page115),seeconnections(page149).
ð"ICO"function:Forthebusychannelindication,itwillberealizedwithterminals"ICO"and"+12".
ð"Handicap" function: Synthese vocale from FDI (France). The connector includes all wires for
connection(seepage149).
1 Grey (-) Ground.
2 Brown (+12) 12Vdc for activation the lock release.
3 White (ICO) Busy channel indicator.
4 Yellow (AP) External push button to activate the lock release.
5 Violet (+H) For activation of an external illumination.
6 Blue (OP) Handicap.
7 Orange (SC) Handicap.
8 Green (ALM) Handicap.
9 Red (PDB) Handicap.
10 Black (-) Ground.