Operation Manual

115
escription of the SW1 configuration dip-switch of
D
the sound module.
Placed to OFF if the EL631/Plus module is configured as EL500
.
Set to ON if the EL631/Plus module is configured as EL501
(generaldoorpanel).
operating
mode
operating mode
Selects the d done from the ('AP'
terminal),seepage149.
PlacedtoON:dooropeningtimedat3seconds.
SettoOFF:dooropeningtimedat15seconds.
oor opening time, external push button
Selectsthetypeofcabletobeusedforthevideosignal.
PlacedtoOFF:coaxialcableRG-59oRG-11.
SettoON:twistedpair.
Placed to OFF if the door panel has telecamera. In case of door panels
withouttelecamera(EL640Plussoundmodule)settoON.
Plussystem,loadstheinstallation withacommunicationsresistorPlus.Fora
propersystemoperation,placed to ONonlyinthe closest doorpaneltothe
backbone installation or in the general door panel (if exists), set the rest to
OFF.
SettoONsothatthevolumetoneemittedbythedoorpanel:
(callreception,busy systemandlock release)areHIGH,orplaced toOFFif a
LOW volumetoneisdesired.
UnoSystem,
proper system operation, set to ON only in the closest door panel to the
backboneinstallation,placedtheresttoOFF.
WithdigitalrepeaterRDPlus/Uno:
In the backbone installation or after the inner door panel in systems with
generaldoorpanels,placedthedoorpanel/stoOFF.
loadstheinstallationwithacommunicationsresistorUno.Fora
6
6
7
6
7
6
Placed to ON,
porter'sexchange(ifexists).SettoOFF,thecallisreceivedintheapartment.
In general door panels systems with porter's exchange, this function is only
applicabletothegeneraldoorpanelsnottotheinnerdoorpanel/s.
the calls made on the door panel will be transferred to the
Factory default
6
7
8
6
7
8
TheSW1configurationdip-switchislocatedattheupperright
sideofthebackofthemodule.
For dip switch settings,
use the tool that is supplied with the
soundmodule.
DOOR PANEL INSTALLATION