Operation Manual

113
DOOR PANEL INSTALLATION
old the frame on the embedding box.
H
lug the push buttons with the short
P
connection cable.
Between push buttons modules EL610D of the same embedding box,
insert the short connection cable of the low connector of the first push
buttons module to the top connector of the second push buttons
module,asshowninthedrawing.
Insert the short connection cable that it is supplied with the product
EL610D, in the push buttons connector of the sound module and the
other end of the connection cable in the connector placed in the top
partofthepushbuttonsEL610Dmodule,asshowninthedrawing.
BetweenpushbuttonsmodulesEL610Dof differentembeddingtboxes,
insert the short connection cable in the low connector of the last
module EL610D of the first embedding box and the other end of the
connection cable in the middle connector of the last push buttons
moduleEL610Dplacedinthelowpartofthesecondembeddingbox,
asshowninthedrawing.
Insert the hinge that it is supplied with the product in the embedding
box,asshowninthedrawing.
Toholdtheframe ontheembeddingbox, insertthehinge inthe
housings arranged for this purpose in the frame, as shown in
thedrawing.
The frame can now be folded horizontally facilitating the connection
and adjustments in the sound module and push buttons electronic
module.