Operation Manual

ManualsBrandsGolmar ManualsIntercoms5403 Stadio Plus - T3403ML

126

CODIGO / CODEMASTER SLAVE

INTER A1

ATENCIÓN

Alta tensión. No abrir la tapa.

Manipular sólo por personal

del servicio técnico.

WARNING

High voltage. Don't open cover.

Handle only by technical service.

PLATEA UNO

REF.

11784022

COD.

PUERTA

Door

ESCALERA

Stair

PISO

Floor

VERSIÓN Nº SERIE

00000000000X.XX

f .

i .

j .

l .

Handset.

B/W or color screen (depending on the model).

Front film (only Platea Plus).

Function push buttons (depending on the model).

Cord.

Attachment holes.

Identification label.

Connecting points.

CN4 connector (CN2 in Platea Uno).

Three positions call reception volume control (only Platea Plus).

Cable slot.

Contrast control (color control in case of color screen).

Brightness control.

MONITOR DESCRIPTION

escription of the Platea Plus and Platea Uno monitors.

Platea Uno

push buttons

127

In platea Plus:On-Off push button. After any monitor reset and during the next 45

seconds, all the monitor functions will be disabled, with the exception of call

reception.

In Platea Uno: On-Off light indicator.

If the handset is on the craddle allows the activation of an optional second camera (*).

If not, allows to make an intercom call or to activate the second camera (*) only

Platea Plus).

If the handset is on the craddle allows the activation of an optional device. If not,

allows to call to a slave porter's exchange (*) or to activate the optional device (only

Platea Plus).

If the handset is on the craddle allows to see the picture from the master door panel.

If not, allows to establish audio and video communication with the door panel

that has been configurated with the autoswitch-on function. This function is

disabled if a communication is already established.

If the handset is on the craddle:

Platea PLUS: sends a panic call to the porter's exchanges that have enabled the

reception of this type of call.

Platea UNO: keep pressing this button for 1 second to turn the monitor On or Off.

45 seconds after turning On the monitor only calls will be received.

If not: in both models allows to call to the master porter's exchange.

During call reception and communication progresses activates the lock release.

(*) Second camera activation and call to a slave porter's exchange functions require an internal

modification of the monitor. If any of these functions are required, contact with your nearest

authorized distributor.

Second camera activation disables the intercomm function and call function to a slave

porter's exchange disables optional device function.

MONITOR DESCRIPTION

unction push buttons.

escription of the identification label.

For an easiest repair, replacement or increasement

of the existing monitors, fill the indentifying label

information.

MASTER: master monitor.

SLAVE: slave monitor.

INTER: slave monitor with intercom function.

A1: monitor connected to an auxiliary device.

CODE: monitor call code (see page 123).

STAIR: building code (see page 107).