User's Manual

Walgreens Installation Guide
G-1-2002-2B
Walgreens Installation Guide 2B.doc
Use or disclosure of this document is covered under the Non-Disclosure Agreement executed between the reader and Goliath Solutions,
LLC. This document and the information contained herein are privileged and should only be viewed by expressly authorized parties.
5/27/2008 Page: 2-3
During the Pre-Installation Survey the following information will be determined:
1) Validate that the provided store floor plan is correct.
2) Validate if power is available by the front security screen for the MEU.
3) Location and power source for the CMU.
4) Location, power source and the mounting method for the MEU.
5) Access point into the stock room for cables.
6) If a second MEU will be required.
7) The actual location for each Tx/ATA and Rx/ARA antennae.
8) The cable lengths required for each Tx/ATA and Rx/ARA antennae.
9) The sequence and order of each cable pulls.
10) The ceiling height and height of roof girders above ceiling.
11) Potential installation issues.
Do not contact the Help Desk until the completion of the Pre-installation
Store Survey unless the provided floor plan is incorrect.
Potential Installation Issues:
If any of the following conditions are present, contact the Help Desk at the completion of
the Pre-installation survey! These issues include, but are not limited to:
 Missing installation kit.
 Missing welcome letter for Store Manager
 Incomplete installation kit
 Damaged installation kit
 Concrete ceilings requiring special tools for installation.
 Wood ceiling.
 Sheet rock ceilings.
 Girder height in excess of 25 feet.
 No roof iron present in the ceiling.