Installation guide

STEP 3:
PREPARE THE VENTING BLOWER
exhaust
ports
Figure 17
ROOM-VENTED (RECIRCULATING)
INSTALLATION:
1. Remove one blower unit mounting screw and
one blower plate screw. Remove the blower
plate from cabinet. See Figure 19.
2. Carefully lift the blower unit out of the
microwave oven.
3. Rotate blower unit 90° so the exhaust ports face
the front of the cabinet. See Figure 20.
4. Place blower unit back into microwave oven.
5. Reattach blower plate to microwave oven.
Attach with the one blower unit mounting screw
and then the one blower plate mounting screw.
See Figure 21.
blower
unit
Figure 20
—~ blower plate
mounting screws
blower unit
exhaust ports
blower unit
mounting screws
Figure 18
blower unit
—- blower plate
mounting screws
blower unit
mounting screws
Figure 19
a ——
| g-— blower plate
a mounting screws
blower unit
mounting screws
Figure 21
— 12 —