Bluetooth speaker with PLL radio and USB/SD BSS-862 INSTRUCTION MANUAL
IMPORTANT SAFETY INSTRUCTIONS: 1. Follow all instructions 2. Clean only with a dry cloth. 3. Read the instructions. All uses guidelines must be read before start device. 4. Keep the instructions for future use. 5. Attention, use and security guidelines must be respected. 6. The device must not be used near water or be put in contact with moisture. 7. Make sure has no liquid is spilled on device and device openings. 8. Move device carefully, avoid shocks. 9. Do not block the breakdown of the device outputs.
L’adaptateur AC/DC de l’appareil est utilisé pour déconnecter le système. L’adaptateur AC/DC de l’appareil ne doit pas être obstrué ou doit être facilement accessible pendant son utilisation. Pour être complètement déconnecté de l’alimentation d’entrée, l’adaptateur AC/DC de l’appareil doit être déconnecté du secteur. 30. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
LOCATION OF CONTROLS 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) LCD display Function button button On / Off Repeat/random play button Tune/Skip down button button Tune/Skip up SD card slot USB socket 3.
4. 5. 6. 7. ¾ ¾ ¾ Press Tuning / Skip up “ or down ” button (6/5), to select the desired station memory position for storage. Press Pre-up/+10/Pro ” button (10) once again to confirm the setting. Repeat step 2 to 5 to store other stations. Now you can select the presets stations in order by pressing the “ Pre-up/+10/Pro” button (10). The pre-set memories will be cancelled completely if dis-connecting the main power supply. You are recommended to switch the system into standby mode for convenience usage.
z Repeat all As this unit repeat all mode was defaulted, if any play mode did not selected, MP3 playback will continuously. Remark - The system can detect and read the file under MP3 format only at USB mode but not other music file format. If connect the system to MP3 player via the USB socket, due to variances in MP3 encoding format, some MP3 player may not be able to play via the USB socket. This is not a malfunction of the system.
