PRODUCT INSTRUCTIONS AND SAFETY WARNINGS ©2018 Goldrabbit Co.,Ltd.
This user guide contains information helpful for using Maunzi. Please read closely before use. Information on safety warnings and cautions are included (page 4) so make sure to read them and use the product for right purposes. This user guide was written October 25, 2018. We are constantly making partial changes, modifications and improvements to Maunzi. However, these changes are not reflected in this guide.
PRODUCT INFORMATION PRODUCT NAME Maunzi KIT NAME Refer to product composition CERTIFICATION Korea China Europe U.S 10-1605059 201711136991.6 003414838-0001 87/567443 DEVELOPMENT & MANUFACTURING Godlrabbit Co.,Ltd. ADDRESS #104, 7 beon-gil, Yongso-ro, Nam-gu, Busan, Korea CUSTOMER SERVICE email tel site info@maunzi.com 070-8885-2237 www.maunzi.com PRODUCT COMPOSITION Kit name Classic Kit Model No.
SAFETY WARNINGS AND CAUTIONS BEFORE USE This product is module assembly type toy robot. This works in connection with Window Cube. 2 Before use, Window Cube should be charged. Follow the instructions in this guide to work properly. 3 Control module Cube (hereinafter referred 3 to as Cube) can only be connected to "Maunzi." Do not connect to other manufacturer's products. 1 PREPARATION BEFORE USE Get smart devices such as mobile or PC, smart pad(hereinafter referred to as tablet) ready.
Make sure to use power supply device provided. When used by children under 6, use it under adult's supervision When the product is deformed during charging or storage and Cubes become overheated, malfunctioning or damage occurs, then immediately separate power supply device from charring cube to prevent fire or electric shock. Pay attention to children's throwing the product or breaking it with force.
Exposure to excessive humidity can cause malfunctioning. Window cube should be disassembled by professional. Use power supply device in room temperature. CAUTIONS : LOW LEVEL DANGER Ignoring the following instructions can cause minor injury or wound. Window cube should be connected to the following power supply devices that are compliant with protection grade 2. We call charging adapter and USB cable combined together as power supply device. input output material AC 100V-240V 0.
FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
BEFORE CHARGING WINDOW CUBE Window Cube doesn’t have storage function. Charging is possible only in Window Cube. Do not charge other Cubes. Obvious damage to or deformation of Charger Cube or malfunction or deformation by heat can cause fire or electric shock. Upon finding relevant symptoms, separate power supply from Charger Cube. The combination of Charging adapter and USB cable is called power supply device here. Use only Maunzi Charger Cube provided.
2 Remove all cubes and blocks connected to Window cube. 1 window cube can be charged. If the window cube is connected to other cubes, disassemble all to leave Window cube. 3 Turn off window cube by pressing power button for 3 seconds. 5 4 Connect Adapter provided to USB cable 6 Shape of plug can vary depending on the country. 8 Connect Adapter 2 to an outlet. Connect USB cable with Charger Cube.
7 Connect Window cube 3 onto Charger Cube 6 . Connect so that red side of window cube is in contact with upper side of Charger Cube. 8 Press down until click sound. 9 Indication lamp will display purple light as charging starts. 10 The purple light will disappear when charging is finished. charging time : about 90 minutes1 Operating time : about 50 minutes2 1 2 2 Time that takes from completely discharged battery to fully charged.
Remove power supply device when charging is finished. REGARDING ERRORS Do not stop modules in motion by force. This can cause internal malfunction. Do not disassemble Window cube by force. DETAILS TO CHECK BEFORE USE Start using when its temperature matches room temperature to prevent damage by condensation of inner parts after a low temperature shipping Do not force motion cubes (motor cube, angle cube, rotation cube) to move. Forcibly turning by hand can cause internal malfunction.
AUTOMATIC POWER CONTROL IN CASE OF OVERHEATING CLEANING Always disconnect Window cube from power supply device before cleaning. When cube is overheated, the indication lamp will blink red. Window cube will be turned off for a few seconds automatically. Automatic power control is built-in to prevent damage to product in case of overheating.
Window Cube : State indication lamp White White blinking Green Green blinking Blue Orange Purple blinking Red blinking Power on System is booting manual operation Maunzi LAB playing Connecting to Bluetooth No battery Charging Error/ malfunction To prevent product deformation, do not connect more than 6 cubes(except bridge) to one Window cube. Connecting to more than 8 cubes can cause malfunction due to overheating. Insert bridge to connect each cube to others.
