Use and Care Manual

15
The handlebars of your Goldoro e-bike are adjustable to ensure a comfortable riding position. To adjust the handlebars, follow these steps:
Loosen the bolt on the stem clamp using a 5mm Allen wrench.
Adjust the angle of the handlebars to your preferred position.
Tighten the bolt on the stem clamp, making sure it is secure but not overly tight.
Note: Before adjusting the handlebars, make sure the e-bike is securely supported and the front wheel is off the ground to prevent any
potential accidents. Also, make sure to tighten the bolt securely to prevent the handlebars from moving while riding.